17 June 2022

We are HTRIC kick-off evenement

The HTRIC kick-off event took place on 17 June 2022. Innovations for the future were shown and connections were made. 

Curious about the programme? Or the aftermovie? You can find it all below! Did you miss out on our kick-off? No worries! We organise another event on 16 June: ‘Discover the World of Health Technolog by HTRIC’. You can sign up now!

Programma

Vrijdag 17 Juni 2022, Forum Groningen (Nieuwe Markt 1)

9.00-9.30

Inloop & registratie

9.30-10.45

Kick it off: Welkom, opening en keynote

10.45-11.15

Pauze met versnaperingen

11.30-12.40

Parallelle sessies (klik op + voor meer info)

Moleculaire beeldvorming wordt een onmisbaar instrument in de operatiekamers van de toekomst. Met zijn ongeëvenaarde vermogen om specifieke informatie te verstrekken over de locatie en aard van maligniteiten, zal het chirurgen begeleiden bij hun werk om veilige, gepersonaliseerde behandelingen te bieden. In deze sessie zullen we het gebruik van beeldvorming in pre- en intra-operatieve setting en evaluatie van therapie belichten, zowel vanuit het academische als het bedrijfsperspectief.

De volgende vooraanstaande sprekers hebben onze uitnodiging aanvaard:

  • Prof. dr. Philip Elsinga, Department of Nuclear Medicine and Molecular Imaging, University Medical Center Groningen (live)
  • Dr. Yi Qiu, Senior Application Specialist, iThera Medical GmbH (online)
  • Prof. dr. Wouter Nagengast, Department of Gastroenterology and Hepatology, University Medical Center Groningen (live)

Het herstel van weefsel- of botschade kan gestimuleerd worden door het gebruik van biomaterialen. Het gebruik van nieuwe materialen en specifieke, op maat gemaakte implantaten belooft spannende perspectieven.

Voor deze sessie zijn de volgende sprekers uitgenodigd:

Prof. dr. ir. Tina Vermonden, Biomaterialen voor medicijnafgifte en regeneratieve geneeskunde, Universiteit van Utrecht

Krimpend printen: technologie om de resolutie van complexe 3D-geprinte hydrogels te verbeteren

Hydrogels zijn ideale zachte materialen voor toepassingen in de regeneratieve geneeskunde, omdat ze veel eigenschappen van de extracellulaire matrix in natuurlijke weefsels kunnen nabootsen. Met behulp van 3D-bioprinting kunnen celbevattende hydrogels worden gefabriceerd tot complexe structuren die de organisatie van weefsels of organen vertegenwoordigen. De resolutie van 3D-bioprinting van deze zachte hydrogelmaterialen is echter nog steeds vrij beperkt en kan geen realistische afmetingen bereiken van buisvormige structuren die in het lichaam aanwezig zijn, zoals bloedvaten en niertubuli. De krimpdruktechnologie maakt gebruik van hydrogelmaterialen die na het printen kunnen worden gekrompen om deze kleine afmetingen te bereiken.

Luuk van Laake, Soft Robotic Matter AMOLF Amsterdam

Fluïde besturing van zachte robots voor toekomstige medische toepassingen

Zachte robots gemaakt van elastomeren met een elastische modulus vergelijkbaar met levend weefsel zijn veelbelovend voor veiligere interacties met mensen. Dergelijke interacties kunnen medische toepassingen omvatten, zoals externe hulpmiddelen (zoals exoskeletten en revalidatiehandschoenen), evenals implanteerbare zachte mechanismen voor vervanging van spieren of organen. We hebben een systeem ontwikkeld dat complexe aansturing van door vloeistof aangedreven zachte robots in of buiten het lichaam mogelijk maakt zonder elektronica (zoals elektromechanische kleppen en controllers). Dit vergemakkelijkt de toekomstige integratie van (belichaamde) besturing met bestaande of nog te ontwerpen soft sensing- en actuatiesystemen aanzienlijk, wat leidt tot de ontwikkeling van lichtgewicht, volledig zachte en duurzamere op zichzelf staande systemen.

Prof. dr.  Max Witjes, 3D Lab

Ecosysteem voor optimalisatie van gepersonaliseerde implantaten in de fast-track productiebaan

Het optimalisatieproject streeft naar een verbeterde methode voor de toepassing van patiëntspecifieke implantaten, voor een grote verscheidenheid aan patiëntengroepen. Beschikbare 3D-technologie kan worden gebruikt om preoperatieve planning en het ontwerp van medische implantaten te ondersteunen. Wanneer de operatie wordt uitgevoerd volgens de 3D-chirurgische planning, is de nauwkeurigheid over het algemeen binnen 1-3 mm, voor elk type operatie (oncologie, trauma enz.). Bovendien worden de resultaten verkregen onafhankelijk van welke chirurg de operatie uitvoert. De snelle productielijn vereist een uitgebalanceerd intramuraal en extramuraal proces van in silico-ontwerp, kadavertesten, kwaliteitsbeheer en snelle productie van medische implantaten. De snelle productieroute zorgt voor een snelle productie van medische implantaten en biedt de unieke mogelijkheid om ook traumapatiënten te behandelen.

 

Kunnen draagbare sensortechnologie-innovaties de nieuwe standaard zijn voor het monitoren van menselijke bewegingen thuis en in ziekenhuizen? Kan draagbare sensortechnologie bijdragen aan een gezonde levensstijl op het werk en thuis? Kunnen biomedische sensoren en apparaten metingen in ziekenhuizen automatiseren, de werkdruk van verpleegkundigen verminderen en de thuiszorg verbeteren? Wat zijn de recente ontwikkelingen op het gebied van chirurgische robots en sensoren? Doe mee met onze serie innovatiebooster die deze vragen bespreekt door middel van een reeks talks, pitches en groepsdiscussies door wetenschappers en ondernemers.

*Please note that this session will be held in Dutch.

Deze sessie wordt verzorgd door het nieuwe programma Hi!Noord. Dit Noord-Nederlandse   initiatief van onder andere het UMCG, Aletta Jacobs School of Public Health, het Center of Expertise Healthy Ageing en HANNN stelt zich ten doel de impact van het gezondheids-ecosysteem in Noord-Nederland te vergroten. Dit gebeurt onder andere door onderlinge versterkingen aan te brengen tussen de communities zoals dat van HTRIC met andere netwerken en door te investeren in een collectieve infrastructuur.
 
Bij deze interactieve sessie, tevens opname voor de Hi!Noord Podcast, staat de vraag centraal hoe we technologische innovatie beter in de directe omgeving van inwoners kunnen laten landen en hoe de verschillende actoren in Noord-Nederland hier een bijdrage aan kunnen leveren. Onder leiding van Edwin Mooibroek worden de ervaringen, uitdagingen en ambities besproken die horen bij het realiseren van gezondheidstechnologie in de directe omgeving van inwoners.

12.45-1.25

Lunch
 & networking

Career Perspective Kick-off voor PhD studenten

1.30-2.45

Innovatie Booster Workshops (klik op + voor meer info)

Digital phenotyping, the measurement of human behavioral phenotypes using personal devices, is rapidly gaining popularity. Novel initiatives, ranging from software prototypes to user-ready research platforms, are innovating the field of biomedical research and health care apps. One example is the Behapp project (www.behapp.com), which offers a fully managed digital phenotyping platform as a service. The innovative potential of digital phenotyping strategies resides among others in their capacity to objectively capture measurable and quantitative components of human behavior, such as diurnal rhythm, movement patterns, and communication, in a real-world setting. (Jagesar et al., 2021)

In this workshop, we will first present to you how we use both active assessed questionnaires and passive digital phenotyping to study social functioning in mental health, and look ahead to the possibilities of using digital monitoring for the early detection of disease, the prediction of relapse and personalized medicine. We will use the second half of the session to think together about the potential (future) applications of digital phenotyping in your own field of research or clinical practice.

This workshop will be hosted by Renate Kat and Anna Langener (Groningen Institute for Evolutionary Life Sciences, University of Groningen)

Every year, more than 1 million people in Europe die of cancer. Ursula von der Leyen – president of the EC – “the fight of those battling cancer is our fight as well”. The EC its ‘Beating Cancer Plan’ focuses on the prevention, treatment and care of cancer. It includes all phases of cancer-development, from prevention to the quality of life of cancer patients and people who have survived cancer.

The Northern Netherlands can and wants to share an essential contribution to the battle against cancer, and in doing so, becoming a recognizable part of the Europe Beating Cancer Plan. The collaboration with the University of Groningen, the Universities of Applied Sciences, the University Medical Centre Groningen en SHINE Veendam dreams about becoming a European-acknowledged center of knowledge, innovation and production for nuclear medicine – for all Europeans and far beyond.

In this innovation Booster we invite you to discuss the future of medical isotopes and nuclear medicine in general in the North, both from fabrication and application perspective. What do you think is needed? What would you like to contribute? Let’s think big and put some common goals!

Dr. Sytze Brandenburg – Nuclear medicine and the use of medical isotopes

Research of Prof. Brandenburg: https://www.rug.nl/staff/s.brandenburg/research

Wim Boeckx/Robin Schellevis – Building a factory for medical isotopes in Veendam

https://www.shinefusion.com/europe/

Dr. Walter Noordzij – Applications of modern medical isotopes

Research of Dr. Noordzij: https://www.rug.nl/staff/w.noordzij/research

Limb amputation has large impact on the patients’ participation and quality of life. In this innovation booster workshop on Artificial Limbs, we want to discuss the surgical procedures, the engineering and clinical methodologies towards rehabilitation, and the outlook to the future.

Organised by Prof. Dr. Raffaella Carloni and Prof. Dr. Han Houdijk

Programma:
– Opening by the organisers
– Lower limb amputation by Prof. Dr. Paul Jutte
– Musculoskeletal modeling of people with lower-limb amputation by Vishal Raveendranathan, MSc
– Motor control in people with upper extremity prosthesis by Dr. Raoul M. Bongers
– ZonMV ProtheseAcademie by Prof. Dr. Han Houdijk
– Discussion and Closing

Programma:

  • Opening session by chair Schelto Kruijff (surgical oncologist) and Femke van der Zant (medical student)
  • Annemarie Leliveld (urologist UMCG): Wanted! Solution for the pollution.
  • Daniek Hakkers (medical student): How to reduce waste in a large academic hospital; the UMCG project
  • Edita Jurak (biochemical engineer): First aid microbesutilizing natural machinery to convert operating room plastic waste
    Summary: While there is still a long way from being able to remove non-biodegradable plastic materials from hospital operating rooms due to strict hygiene requirements, d eveloping efficient, green conversion options by using microbes is a promising source of new technologies that can provide results within a short research timescale.
  • Jon Salt (consultant biobased and circular economy) & Wybren Kalsbeek (specialist Circular &biobased polymers) on Sustainable Plastics: on the way to green healthcare
    Summary: Take a dive into a variety of projects focussed on using biobased and recycled plastics to improve the sustainability of healthcare in the North of the Netherlands. From injection moudling and 3D printing with recycled hospital packaging waste, to alternative plastics as replacements for current materials, the possibilities are endless.

Nanomedicine is de toepassing van nanotechnologie om innovatie in de zorg te realiseren. Het faciliteert gepersonaliseerde, gerichte en regeneratieve geneeskunde door het leveren van het volgende niveau van nieuwe medicijnen, behandelingen en implanteerbare apparaten aan clinici en patiënten voor echte doorbraken in de gezondheidszorg.

Nanomedicine maakt ook vroege detectie en preventie mogelijk en verbetert de diagnose, behandeling en follow-up van veel ziekten drastisch. 

Tegenwoordig heeft nanogeneeskunde honderden producten onder klinische proeven, die alle belangrijke ziekten omvatten, waaronder kanker, cardiovasculaire, virale infecties, neurodegeneratieve, musculoskeletale en inflammatoire ziekten. Nanogeneeskunde is al goed voor ongeveer 80 op de markt gebrachte producten, variërend van nano-levering en farmaceutica tot medische beeldvorming, diagnostiek en biomaterialen. Het meest recente en bekende geval is de ontwikkeling en klinische toepassing van de COVID-19-nanovaccins die een ongekende revolutie teweeg hebben gebracht in zowel de gezondheidszorg als de farmaceutische en nanogeneeskunde.

In deze workshop zullen uitgenodigde sprekers de huidige status van de nanomedicijnen presenteren en bespreken, de voordelen (en uitdagingen) bij het vertalen ervan naar de kliniek, hoe je van bench naar succesvolle farmaceutische bedrijven kunt gaan, specifieke succesvolle casusverhalen en provocerende vragen om betrokken te raken. met het publiek.

Eindelijk bent u ervan overtuigd dat uw innovatieve product klaar is. Na maanden van testen, aanpassen en feedback vragen, staat u op het punt uw product voor de eerste keer bij mensen te proberen of, nadat u met succes menselijke proeven heeft uitgevoerd, uw product op de markt brengt. Dan sta je voor de drempel van het passeren van de METC of wetgevende instanties en moet je gegevens aanleveren waar je zelf nooit aan had gedacht. Bovendien merk je voor het eerst de volledige impact van een vage term uit het verleden: MDR!

It sets you back months and, considering all unexpected costs mounting at your expense, it puts the whole launch at a business risk. If you recognize or fear such a situation, this booster is definitely for you! On 17 June, experts in the field of Medical Device Regulation or the Medical Ethical Review Committee and business people who experienced what MDR can do to your business share their experiences and recommendations. 

Deze HTRIC MDR Booster is bedoeld om u bewust te maken van de MDR-regelgevingskwesties en hoe u dit kunt omzetten in een concurrentievoordeel voor uw bedrijf. 

ZiuZ is a leading innovator in AI and computer vision for Health Care and Forensic applications. Their solutions ensure that patients receive the correct medications, support efficient and safe diagnosis of medical conditions and prevent the spread of child abuse online. ZiuZ’s customers are located in over 50 countries around the world and they work closely with universities and research institutes to develop novel technologies that solve socially relevant challenges.  

During this workshop, ZiuZ will reflect on the technical and entrepreneurial challenges the company faced over the past twenty years in growing ZiuZ from a startup to a market leader in computer vision for healthcare applications. ZiuZ’s founder, Gerrit Baarda, will share insights into how the company develops and launches novel products comprising a combination of algorithms, software and hardware – often successfully, but certainly not without failures along the way. Research Engineer Joost Calon will delve into the technology behind ZiuZ’s recent innovations and cut through some of the hype surrounding AI for healthcare to explore what we can and can’t expect from algorithms in the healthcare and medical imaging space. This informal workshop will take the form of a ‘fireside chat’ and leave plenty of room for questions from and knowledge sharing with participants.

Games hebben bewezen aantrekkelijke toepassingen te bieden in veel zorggebieden. Voorbeelden zijn te vinden b.v. bij trainingsspellen, diagnosehulpmiddelen en gedragsveranderingen. Om een succesvolle game in de zorgomgeving te lanceren, moeten echter veel uitdagingen worden overwonnen: vanaf het begin van de game-ontwikkeling is een serieuze aanpak vereist!

Op 17 juni organiseert NHL Stenden hogeschool een Innovation Booster Workshop om inzicht te geven in het complexe ontwikkelproces van Games for Health. Aan de hand van een praktijkcasus illustreren we de stappen die we nemen vanaf de verkenning van het vraagstuk tot het ontwerp en de evaluatie van de implementatie. Door deel te nemen aan deze workshop ervaar je zelf hoe het game design proces is veranderd door co-creatie met het betrokken publiek.

Als je er ooit aan hebt gedacht om games voor zorgtoepassingen te ontwikkelen, of als zorgprofessional hebt gewerkt en je zoekt hoe een serious game je dagelijkse professionele werk een boost kan geven, dan is deze Innovation Booster Workshop iets voor jou. Mis het niet!

Programma:

13:30-13:35 Introduction
13:35-13:55 The Big Picture
13:55-14:35 Research, design and education
14:35-14:45 Case ITM and Reducept.
How society can benefit from research; valorization and the protection of knowledge
 
Herman Groen – Business Developer at Business Generator Groningen: What does a Knowledge Transfer Office like Business Generator Groningen do and why is that important for you as a researcher?
 
Annemiek Tepper – Patent Attorney at Patent & Trademark Office VO: Patenting may be important for you as a researcher, and patenting and publishing does not have to be in each other’s way.

Innovation on the area of health technology, including the development of Artificial Intelligence (AI), moves quickly and with high expectations. It offers opportunities to contribute to a high quality and affordable health care, but it also raises a lot of questions. A question such as which ideas and expectations people have of AI. Are these expectations too optimistic or too pessimistic?

How do our social and political values influence these expectations? And what does this mean for the development and implementation of AI and what can art mean in this?

To promote the development and implementation of trustworthy and human-focused AI, several ELSA (Ethical, Legal, and Societal Aspects) labs are set up in the Netherlands, in which researchers, societal partners, companies, citizens and patients work together.

In this Innovation Booster we will explain how the ELSA lab Northern Netherlands wants to contribute to the responsible development and implementation of AI in health care.

During the ELSA lab Innovation Booster, Dr. Mirjam Plantinga and Dr. Ritumbra Manuvrie will take you into the research that ELSA Lab Northern Netherlands is planning to do, to get more insight into these questions. Moreover, Dr. Judith van Elst will focus on the meaning of art in this process.

Finally, we will play a serious game in which the possibilities of the contribution of AI in health care will be explored in a playful way, and we will discuss the challenges of responsible development and implementation of AI in health care.

2.45-3.15

Pauze met versnaperingen

3.20-4.00

Plenaire afsluiting van de kick-off

4.00-5.00

Borrel & netwerken

Inschrijven voor “We are HTRIC kick-off”

Vrijdag 17 Juni 2022, Forum Groningen (Nieuwe Markt 1)

Per doelgroep is er een beperkt aantal plaatsen beschikbaar. Selecteer wat voor u van toepassing is:

Aan welke parallelsessie wil je deelnemen? Kies er een:

Fully booked ! Sensing and monitoring: innovations transforming healthcare at hospitals and home
Fully booked ! Gezondheidstechnologie in de eigen leefomgeving

Bij welke Innovation Booster zou jij je willen aansluiten? Kies er een:

Fully booked ! Artificial Limbs (mechatronic design and control) 

Word onderdeel van HTRIC. Laten we je toevoegen aan het team!

Upload je profielfoto, link naar LinkedIn-profiel en een korte bio, zodat we je kunnen toevoegen aan de website.

Laad een profiel foto op

Vanwege een beperkt aantal plaatsen informeren wij u binnenkort over de goedkeuring van uw inschrijving. LET OP: Het programma is in de engelse taal!

nl_NL